ATOMOS Shinobi 7

Shinobi 7" 4K HDMI/SDI HDR Photo & Video Monitor
Shinobi 7 combines a large 7” HDR screen with a calibrated peak brightness of 2200Nits and the lightweight Monitor-only functions of the original Shinobi. The Shinobi 7 can be used in the brightest of environments to monitor signals up to 4Kp60 via HDMI. An ideal directors' monitor, focus pullers' monitor, program or preview display for video switchers and perfect for vloggers presenting to camera.

CAMERA CONTROLS AT THE FINGERTIPS
Control camera functions with the intuitive touchscreen of the Shinobi 7, designed to give you fast access to the most crucial camera features. The optional Atomos USB-C to serial cable gives you direct control of all the menu configurations on Z Cam E2 series cameras, so that you can focus on the beautiful image and make dynamic adjustments of iris, white balance, shutter angle and ND.

HDR IN THE FIELD
Shinobi 7 screen displays a stunning 10+ stops of dynamic range in real time from Log/PQ/HLG signals. Combined with our unique HDR monitoring features, the Shinobi 7 simplifies the complexities of shooting Log and HDR.

BUILT IN 3D LUT BOX
In addition to Log to HDR conversions, you can also use your own custom LUTs to feed downstream or live feed. Load up to eight custom LUTs at any time via the SD Card Slot and instantly select between them, maintaining creative intent at all times.

THE BEST OF ATOMOS 10
Shinobi 7 utilizes the AtomOS 10 platform and is packed with an extensive suite of scopes and simple one-touch operations. Shinobi includes monitoring tools for focus, framing & exposure, including Focus Peaking, 4:1 / 2:1 / 1:1 Zoom in, Zebra, False Colour, Cine and social frame guides, SMPTE Safe Area, Waveform, RGB parade, vectorscope, anamorphic de-squeeze.

ATOMOS ‘ANALYSIS’ MODE
The Analysis feature allows you to see a waveform, histogram and vectorscope simultaneously whilst monitoring the image to ensure complete control of your image. You can even switch between different waveform, histogram and vector scope options on the fly with a single touch.

CONTINUOUS POWER
Shinobi 7 was designed to optimize battery usage while monitoring, as the dual battery slots combine to allow you to run all day and easily hot-swap batteries. The dedicated locking DC jack input allows you to connect to mains power on-set and can also be used with the optional DC to D-Tap cable for power in the field from block batteries.

PRO I/O AND CROSS CONVERSION
With both HDMI and SDI for input or output Shinobi 7 fits in to any production. With built in cross conversion and 4K to HD down conversion you can easily bring HDMI cameras in to SDI workflows with out the need for separate convertors.

FACTORY & USER CALIBRATION
Factory calibrated for Rec.709, Shinobi 7 also supports user calibration with X-Rite’s i1DisplayPro/Plus and free Atomos Calibration software, which automates the calibration of the screen to ensure accurate and reliable HDR and Rec. 709 monitoring.

Specifications:
Dimensions (W x H x D mm) 198 x 133 x 39
Weight 577g / 1.04lb
Mount points 1 x Anti rotation 1/4" / 3/8 top and bottom
Ambient operating temperature Up to 40° C
Body Polycarbonate ABS Plastic
Cooling Actively controlled fan and heat sink
Multi-function button Power / lock Screen
Input voltage 6.2V - 16.8V
Operating power 5.8V - 7.2V
Compatible batteries 2 x NPF L series
Built in battery No
Battery Run time (Record) 5200mAh - up to 2hrs, 7800mAh - up to 3hrs
Continuous power Dual battery slots
DC in connector Locking DC jack
Dtap Via optional DTap to DC cable
Touchscreen SuperAtom IPS panel (capacitive touch)
Size 7"
Resolution 1920 x 1080
PPI 325
Bit depth 10-bit (8+2 FRC)
Backlight Type Edge lit
Brightness (cdm2 / nits) 2200 +/- 10%
Aspect ratio 16:9 Image Display
Color Gamut Rec.709
Calibration support Atomos Calibrator with Xrite i1 Display Pro / Plus (Retail)
Color Pipeline 
Gamma Sony SLog / SLog2 / SLog3, Canon CLog / CLog2 / Clog3, Arri Log CEI160 / LogCEI200 / LogCEI250 / LogCEI320 / LogCEI400 / LogCEI500 / LogCEI640 / LogCEI800 / LogCEI1000 / LogCEI1280 / LogCEI1600, Panasonic Vlog, JVC JLog1, Red LogFilm / Log3G10 / Log3G12, FujiFilm Flog, PQ (HDR10), HLG, Nikon N-Log
Gamut Bt2020, DCI P3, PDCI p3 65, Sony SGamut / SGamut3 / SGamut3.cine / Canon Cinema / DCI P3 / DCI P3+ / BT2020, Panasonic V Gamut, Arri Alexa Wide Gamut Rec709, JVC LS300, Red DragonColor / DragonColor2 / RedColor2 / RedColor3 / RedColor4 / RedWideGamut
3D LUT Display .Cube Format
3D LUT Down Stream Loop out
3DLUT 50/50 Yes
Monitoring Modes Native / HLG / PQ / 3D LUT
HDR output Conversion HLG / PQ
Video Input 
HDMI 1 x HDMI (2.0) 4Kp60
SDI 1 x 3G SDI - 2k p60
Bit Depth 8/10-bit Video
Video Chroma Subsampling YCbCr 420 & 422
Metadata 
Video Output 
HDMI 1 x HDMI (2.0) 4Kp60
SDI Play out 1 x 3G SDI - 2Kp60
Web Streaming 
Video Signal Conversion 
HDMI to SDI Yes
SDI to HDMI Yes
Audio In/Out 
HDMI 2ch 24-bit, input dependent
SDI 8ch 24-bit, input dependent
Headphone out 3.5mm 2ch.
Timecode / Sync 
Embedded HDMI and SDI
Resolution and Frame Rates (Record, Monitor & Playback) 
4k DCI Monitor Only: DCI: HDMI: 23.98p, 24p, 25p, 29.97p, 50p, 59.94p
4k UHD Monitor Only: UHD: HDMI: 23.98p, 24p, 25p, 29.97p, 50p, 59.94p
2K DCI 2046 x 1080 Monitor Only: DCI 2046 x 1080: SDI: 23.98p, 24p, 25p, 29.97p, 50p, 59.94p
FHD 1920 x 1080 Progressive Monitor Only: HDMI and SDI : 23.98/24/25/29.9/30/50/59.94/60p
FHD 1920 x 1080 Interlaced Monitor Only: 50/59.94/60i 1280 x 720p: 50/59.94/60p
Recording CODEC 
CDNG No - Monitor only
Apple ProRes RAW No - Monitor only
Apple ProRes No - Monitor only
Avid DNxHD No - Monitor only
Avid DNxHR No - Monitor only
H.265 No - Monitor only
H.264 No - Monitor only
Playback 
Playlist No - Monitor only
Recording functions 
Pre-roll record No - Monitor only
ISO Record No - Monitor only
Switched Program Record No - Monitor only
Timelapse No - Monitor only
RAW to Video Record No - Monitor only
Simultaneous proxy record No - Monitor only
4k to HD No - Monitor only
Multi Input / Switching 
Supported media 
SD SD Card slot for LUTs / Firmware
File System ExFAT
On screen tools 
MultiScope Analysis View Image, selectable Waveform, Histogram, Vectorscopes and Audio bars
Waveform Yes, 3 size / Position
Histogram Luma and RGB
RGB parade Yes, 3 size / position
Vector scope Yes, 2 size / position and zoom
1 x Zoom Yes. 1:1 Pixel mapping for 4K
2 x Zoom Yes
4 x Zoom Yes
Focus peaking Color selected / focus assist sharpening / threshold setting / color / mono / edges only
False colour Yes
Zebra Yes, adjustable
Isolate color channel Blue only
Cine Frame Guides 2.4:1, 2.35:1, 1.9:1, 1.85:1, 4:3
Social Frame guides 9:16, 1:1, 191:1, 4:5
Safe areas Action and Graphic
Grid markers 9 Grid
Anamorphic desqueeze 1.25x, 1.33x, 1.5x, 1.8x, 2x
Display Flip Vertical and Horizontal selfie mode
Onboard Signal Processing 
4K UHD Downscale for HD Yes
DCI Crop Yes
Remote control 
External Device Control 
Serial 2.5mm Jack USB-C to Serial (ATOMCAB018)
USB Camera control for supported cameras in future firmware release
RJ45 Camera control for supported cameras in future firmware release
Supported Applications 
What’s in the box 
Accessories included Shinobi 7, International DC power adaptor and Quickstart guide
Optional extras Power Kit, HDMI cables, USB to serial cable, AtomX Mounting Arm (10" / 13"), Monitor Mount