UKENS TILBUD!
GRATIS FRAKT!
for ordre med vareverdi over 400,-. Gebyr kr. 0
HP Lamineringsmaskin OneLam Combo A3
Varenummer: 93755
Produsent: ALSO Digital
Originalnummer:3162
EAN-nummer: 4030152031627
Vekt:2.14 kg
Antall på lager:5 stk
Sendes om: 2-3 dager
Gebyr kr. 0
An intuitive function button on the HP OneLam Combo A3 is usedto set the required temperature. After selecting the film thickness, this modern backloader is ready for use in 2-4 minutes.
The integrated roller cutter, the corner scraper, and the 15-piece starter set, consisting of three A4, four A5, four A6 and four business card foils, all ensure immediate laminating fun. The corner scraper can be stored in a practical compartment under the device so that you always have the accessories at hand.
The all-rounder laminates at a speed of 400 millimetres per minute, which corresponds to just over 60 seconds for an A3 document.
Have you accidentally inserted the film with the laminating document at an angle and a paper jam has occurred? No problem, because by pressing the roller release lever, the film is released and can be carefully pulled out on the input side.
If you forget to switch off the HP OneLam Combo A3 at the main switch, the reliable helper automatically switches to standby mode after 30 minutes.
- Area of application: private households / hobby requirements
- Laminating formats: from business cards to DIN A3 format
- Warm-up time: 2 - 4 minutes for 80 microns
- Film thickness: 75/80 up to 125 microns or 0.5 mm thickness
- Application: Hot and cold lamination
- Laminating speed: 400 mm per minute
- Temperature: 120 - 150 degrees celsius
- Heating system: 2 rollers are heated from the inside
- Input width: 330 mm
- Colour: white
- Integrated cutter for straight, corrugated or perforated cuts
- Corner scraper
- 15-piece starter set (3 x DIN A4, 4 x DIN A5, 4 x DIN A6, 4 x business cards)
- Function Button: On/off, 75/80 microns, 125 microns, cold
- Temperature controlled: each film thickness has its own temperature
- Automatic standby mode: after 30 minutes
- ABS function: roller release lever
- Voltage: 220 - 240 V
- Frequency: 50 / 60 Hz
- Power: 400 W / 1.74 A
- Motor type: AC
- Item number: 3162
- EAN: 4030152031627
- Device dimensions: 460 mm x 158 mm x 115 mm (width x depth x height)
- Device weight: 1.65 kg
| Produkt | |
| Produktbeskrivelse | ANUMAN Necronomicon - The Dawning of Darkness |
| Høyde (cm) | 0.0001 |
| Bredde (cm) | 0.0001 |
| Dybde (cm) | 0.0001 |
| Produsentens garanti | No Warranty |
| Merke | HP |
| Produktkategori | Lamineringsmaskiner |
| Kollistørrelse | 4 |
| Egenvekt (kg) | 0,49 |
